blob: 027d76c27a41d33a1ec21b5cfe58b95ad97d9b65 [file] [log] [blame]
Analogix Display Port bridge bindings
Required properties for dp-controller:
platform specific such as:
* "samsung,exynos5-dp"
* "rockchip,rk3288-dp"
* "rockchip,rk3399-edp"
physical base address of the controller and length
of memory mapped region.
interrupt combiner values.
from common clock binding: handle to dp clock.
from common clock binding: Shall be "dp".
from general PHY binding: the phandle for the PHY device.
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
Indicate driver need force hpd when hpd detect failed, this
is used for some eDP screen which don't have hpd signal.
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
-port@[X]: SoC specific port nodes with endpoint definitions as defined
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x10000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
clocks = <&clock 342>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";