blob: a679d3647dbd40abccbd062df405c080af3cf8cb [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
- Thierry Reding <>
description: |
This panel requires a dual-channel DSI host to operate. It supports two modes:
- left-right: each channel drives the left or right half of the screen
- even-odd: each channel drives the even or odd lines of the screen
Each of the DSI channels controls a separate DSI peripheral. The peripheral
driven by the first link (DSI-LINK1), left or even, is considered the primary
peripheral and controls the device. The 'link2' property contains a phandle
to the peripheral driven by the second link (DSI-LINK2, right or odd).
Note that in video mode the DSI-LINK1 interface always provides the left/even
pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
is possible to program either link to drive the left/even or right/odd pixels
but for the sake of consistency this binding assumes that the same assignment
is chosen as for video mode.
- $ref: panel-common.yaml#
const: sharp,lq101r1sx01
reg: true
power-supply: true
backlight: true
$ref: /schemas/types.yaml#/definitions/phandle
description: |
phandle to the DSI peripheral on the secondary link. Note that the
presence of this property marks the containing node as DSI-LINK1
- compatible
- reg
- link2
- power-supply
additionalProperties: false
- |
dsi0: dsi@fd922800 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfd922800 0x200>;
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
reg = <0>;
link2 = <&secondary>;
power-supply = <&power>;
backlight = <&backlight>;
dsi1: dsi@fd922a00 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfd922a00 0x200>;
secondary: panel@0 {
compatible = "sharp,lq101r1sx01";
reg = <0>;